PRACTICAL WORK AND NEW DISCOVERY

avatar

Good evening lovers of hive, today also which marks the second day of going into the workshop for this week after going for a little theory talk, we were taken into the practical lab just to carry out the experiment which has been explained to us through the theory. For better understanding on any course or any subject, there should be no limit to just theory teaching alone but also there have to be the hours of practical so that the student or learner will be able to carry out the real work been taught by themselves.

IMG_20210707_140441.jpg

So today, we were shown some instrument which are being used in the site for engineering work and also the usefulness and maintenance of each instrument and equipment been used. We were shown the digital and analog G-clamp which we used to measure the inner and outer diameter of a cashew seed.

IMG_20210707_140430.jpg

We were also taught on how to calculate the standard value of materials been used in the site and many ways to get the original values.so I just had to take pictures of some experiments we carried out. One of the experiment we did is how to test for the deepness of a material,

IMG_20210707_140437.jpg

the thickness of the material and also the diameter of the material. We are been given the measuring cylinder filled with water but not filled to the brim, so we were given a Vernier caliper to use in measuring the depth of the water level and it was so easy to calculate.

IMG_20210707_140502.jpg

IMG_20210707_140419.jpg

That was how the practical class today went



0
0
0.000
0 comments